EFILive Release Notes

Version Numbers

EFILive Software

· V8.3.33

FlashScan/AutoCal V3

· Firmware: V3.00.102

· Boot Block: V3.00.006

FlashScan/AutoCal V2

· Firmware: V2.08.194

· Boot Block: V2.08.009

EFILive V8 Software

V8.3.33

· Added TIS import option for E98 file sets. See [F8: Tools] -> [F3: Import] -> [TIS Import].

· Fixed [F8: Tools] -> [F7: Bin Mapping] display for E86B which was incorrectly showing the address mapping for E86A.

· Added [Identify] option to the [F4: OBD]->[F3: OBD] display to quickly retrieve just the controller identification details without also retrieving test results and DTCs.

· Added torque check sum corrections for E41 files. Modified E41 files will now have their torque check sums updated when saved (prior to flashing) using the EFILive V8 software.

V8.3.32

· Allow user to configure 2D charts to use the standard arrow mouse pointer - for greater accuracy when moving chart points.

· Added V7 style smoothing option to the tune editor smoothing controls.

· Added Pro Tuning option to allow some read-only calibrations to be read-write.

· Fixed problem that caused some E98 controllers to show a corrupted serial number, which in turn caused VIN licensing attempts to be rejected.

· Fixed check-sum errors when importing E86B JTAG files.

V8.3.31

· Added Pro Tuning option to bypass flash restrictions on ECMs that cannot be identified, for the following ECM types: E01, E41, E88, E90, E93, E99 and T87A.

· Added ability to open stock CMF (CM2450B) 2022 tune files in the EFILive V8 software and flash the stock file into an ECM. The software will complain that "EFILive cannot determine some OS specific data.", and to "email the file to support@efilive.com for analysis". That is not necessary as the files cannot be edited and modified files cannot be flashed into the 2022 ECMs. Only untouched/stock files can be flashed into the CM2450B ECM.

FlashScan/AutoCal V3 Firmware

V3.00.102

· Added option to emit an audible tick each time a rogue module transmits data during OBDII bus silence. The option can help identify misbehaving modules, by disconnecting modules one-by-one until the audible ticks are silenced. See Tune Tool -> F1: Tuning -> F4: Test OBD Network -> F4: Monitor Rogue Modules.

· Pressing "Fn" three times in a row will save a screen shot of the LCD screen image in a *.bmp file in the \EFILive\Screens folder.

V3.00.101

· *.xalm trace files now capture additional information to help EFILive support interpret the trace data more effectively.

V3.00.100

· Added Pro Tuning option to bypass flash restrictions on ECMs that cannot be identified, for the following ECM types: E01, E41, E88, E90, E93, E99 and T87A.

FlashScan/AutoCal V2 Firmware

V2.08.194

· Added Pro Tuning option to bypass flash restrictions on ECMs that cannot be identified, for the following ECM types: E01, E41, E88, E90, E93, E99 and T87A.

Calibration Updates

V8.3.33

· Added editing support for CM2250 operating systems: 05300138 and 05300154.

· Added editing support for E92 operating system: 12720775.

· Fixed issue with calibration B0951 in E92 operating systems: 12677012, 12683365, 12685939, 12686391, 12688929, 12711166, 12688228,
12688025, 12711163, 12691156, 12711165, 12686744, 12691157 and 12711167.

· Added additional idle calibrations to selected E67 operating systems: 12603381, 12652955, 12653669, 12656245, 12656942 and 12658816

· Added editing support for CM2450A operating system: 64702332.

· Added editing support for E78 operating system: 12692707.

· Added CMC VATS patch for operating systems: 11551035 and 11620807.

V8.3.32

· Added editing support E78 OS 12658818.

· Added missing tables to multiple E78 operating systems.

V8.3.31

· Added E80 VATS patch for operating systems: 12692780 and 12696874

· Added editing support for CM2350B (CME) operating system: 32150405.

· Added Locking support for E39A operating system: 12644447and 12654753.

· Added VATs patching for E39A operating system: 12670802.

· Added editing support for CM2350A operating systems: 23701853, 32012003, 32150405 and 60701765.

· Added editing support for CM2450A operating system: 64702113.

· Added editing support for many new CMF (CM2450B) operating systems.

Documentation Updates

V8.3.31

· None.

Limitations

Limitation #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

Known Issues

None.