EFILive V7.5 and V8 Release Notes

June 2020 - Public Beta Release - 3

Updates and changes since V8.3 public release - 2

Version Numbers

· V8 Software: V8.3.1

· V7.5 Software: V7.5.30

· FlashScan/AutoCal V3 Firmware: V3.00.043 (June 26, 2020)

· FlashScan/AutoCal V2 Firmware: V2.07.163 (June 24, 2020), Boot Block: V2.07.008 (July 4, 2018)

EFILive V8

Enhancements:

Beta 48-3

· Replaced USBView.exe utility with the more comprehensive USBTreeView.exe in the Drivers\Utilities folder.

Beta 48-2

· TCM licensing is now free for both V2 and V3 devices.

· FlashScan/AutoCal V3 VIN license slot count has been increased from 221 to 600.

· Individual windows can now be managed more easily via the Windows Task Bar - or via new drop down button menus in the lower left corner, or via hotkeys.

· Software registration is not required.

· Manage customer details per vehicle and use customer details in scan and tune file name templates.

· User defined calibrations conversion process from V7 *.cax file format to V8 *.cax8 format.

· User defined script conversion process from V7 *.txt format to V8 *.Lua format.

· V3 devices can be configured to appear as a USB thumb drive in Windows Explorer, allowing file transfers and management to be performed without installing the EFILive software.

· Tune file editor is available for selected controllers and operating systems:

· Tune file comparison between different operating systems.

· Scan and tune file linking is now supported.

· V3 devices support black box data logging without upgrading to CSP5.

· Dodge Cummins FAST CAN mode can be configured as a device setting.

· Custom, user defined menu systems can be created for V3 devices.

· The EFILive EULA is displayed and must be accepted each time a V3 device is powered on before it can be used in standalone mode.

· AutoCal's linked/unlinked status is displayed at the bottom of the EULA screen.

· Transferring files to/from V3 devices is up to 10 times faster than V2 devices.

· And many more...

Bug Fixes:

Beta 48-3

· Updated OBD error codes and messages in the $0300..$03FF range.

Beta 48-2

· Fixed CMC checksum issue.

· E54 (LB7) and E60 (LLY) serial numbers are now shown in the [F4: OBD] window.

· CMF VIN change is now supported in [F4: OBD]->[VIN Change].

· Disabled hotkeys for editing tune files when no tune file is open and/or when no *.cam file is present for the open tune file.

· Additional USB message management to mitigate the $0101 error that may occur on some USB configurations.

· Tune files from A40 controllers that identify as "A46" can now be opened the V8 software.

· Selecting the "Next Scan/Tune Window" (hotkey Alt+F2 and Alt+F3) would cause the next window to be restored to its un-maximized size if it had been previously maximized.

Known Issues:

· When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.

Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

EFILive V7.5

Calibration Updates:

Dodge Cummins

· New support and updates to existing operating systems for the following controllers: CME and CMF.

Cummins Heavy Duty

· New support and updates to existing operating systems for the following controllers: CM2350A.

GM Gas

· New support and updates to existing operating systems for the following controllers: E39, E78, E80, E84 and E92.

GM Diesel

· New support and updates to existing operating systems for the following controllers: E98.

Transmission

· New support for the following controllers: T76.

Enhancements:

· None.

Bug Fixes:

· None.

Known Issues:

· None.

FlashScan/AutoCal V2

Enhancements:

· None.

Bug Fixes:

(V2.07.163)

· Update to ensure all TCM controllers do not require a VIN license to be flashed.

(V2.07.162)

· Fixed slow black box flashing.

Known Issues:

· None.

FlashScan/AutoCal V3

Enhancements:

· None.

Bug Fixes:

(V3.00.143)

· To protect the integrity of files on the device, any attempt to read, modify or delete any file or folder using EFILive_Explorer.exe while a black box operation (read, flash or data logging) is in progress, will be rejected with the error $010C "Device is busy".

· Update to ensure all TCM controllers do not require a VIN license to be flashed.

(V3.00.042)

· E45 (LB7) and E60 (LLY) serial numbers are now shown on the V3 screen when selecting: Diagnostics -> F1: Display Info -> F1: Display VIN/Info.

Known Issues:

· None.

Documentation Updates

· EFILive Error Codes.pdf.

Knowledgebase Updates

· None.